dmesg - Ubuntu K3.13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-63-generic (buildd@lgw01-18) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #103-Ubuntu SMP Fri Aug 14 21:42:59 UTC 2015 (Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000b8bb9fff] usable
BIOS-e820: [mem 0x00000000b8bba000-0x00000000b8be9fff] reserved
BIOS-e820: [mem 0x00000000b8bea000-0x00000000b8bfbfff] ACPI data
BIOS-e820: [mem 0x00000000b8bfc000-0x00000000b985ffff] ACPI NVS
BIOS-e820: [mem 0x00000000b9860000-0x00000000b9ae4fff] reserved
BIOS-e820: [mem 0x00000000b9ae5000-0x00000000b9b3ffff] type 20
BIOS-e820: [mem 0x00000000b9b40000-0x00000000b9b40fff] usable
BIOS-e820: [mem 0x00000000b9b41000-0x00000000b9b82fff] reserved
BIOS-e820: [mem 0x00000000b9b83000-0x00000000b9cf3fff] usable
BIOS-e820: [mem 0x00000000b9cf4000-0x00000000b9ff9fff] reserved
BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0xb8bed000 ACPI 2.0=0xb8bed000 SMBIOS=0xf05b0 MPS=0xfd940
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x000000000003f000) (0MB)
efi: mem03: type=10, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem04: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001504000) (20MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000001504000-0x0000000002000000) (10MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003404000) (20MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000003404000-0x000000001f000000) (443MB)
efi: mem09: type=0, attr=0xf, range=[0x000000001f000000-0x000000001f100000) (1MB)
efi: mem10: type=7, attr=0xf, range=[0x000000001f100000-0x0000000020000000) (15MB)
efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000020100000-0x000000003496a000) (328MB)
efi: mem13: type=2, attr=0xf, range=[0x000000003496a000-0x00000000364ad000) (27MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000364ad000-0x000000006d83e000) (883MB)
efi: mem15: type=2, attr=0xf, range=[0x000000006d83e000-0x000000009a000000) (711MB)
efi: mem16: type=4, attr=0xf, range=[0x000000009a000000-0x000000009a020000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x000000009a020000-0x00000000b1f83000) (383MB)
efi: mem18: type=2, attr=0xf, range=[0x00000000b1f83000-0x00000000b2159000) (1MB)
efi: mem19: type=1, attr=0xf, range=[0x00000000b2159000-0x00000000b227f000) (1MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000b227f000-0x00000000b85ba000) (99MB)
efi: mem21: type=7, attr=0xf, range=[0x00000000b85ba000-0x00000000b885d000) (2MB)
efi: mem22: type=2, attr=0xf, range=[0x00000000b885d000-0x00000000b8867000) (0MB)
efi: mem23: type=3, attr=0xf, range=[0x00000000b8867000-0x00000000b8bba000) (3MB)
efi: mem24: type=0, attr=0xf, range=[0x00000000b8bba000-0x00000000b8bea000) (0MB)
efi: mem25: type=9, attr=0xf, range=[0x00000000b8bea000-0x00000000b8bfc000) (0MB)
efi: mem26: type=10, attr=0xf, range=[0x00000000b8bfc000-0x00000000b9860000) (12MB)
efi: mem27: type=6, attr=0x800000000000000f, range=[0x00000000b9860000-0x00000000b9ae5000) (2MB)
efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000b9ae5000-0x00000000b9b40000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000b9b40000-0x00000000b9b41000) (0MB)
efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000b9b41000-0x00000000b9b83000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000b9b83000-0x00000000b9cf4000) (1MB)
efi: mem32: type=6, attr=0x800000000000000f, range=[0x00000000b9cf4000-0x00000000b9ffa000) (3MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000b9ffa000-0x00000000ba000000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
efi: mem35: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem36: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
efi: mem37: type=11, attr=0x8000000000000000, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
efi: mem38: type=11, attr=0x8000000000000000, range=[0x00000000ffa00000-0x0000000100000000) (6MB)
SMBIOS 2.8 present.
DMI: Dell Inc. Inspiron 3551/04XH5N, BIOS A04 07/07/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BA800000 mask FFF800000 uncachable
3 base 0BB000000 mask FFF000000 uncachable
4 base 0BC000000 mask FFC000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2984MB, range: 8MB, type UC
reg 3, base: 2992MB, range: 16MB, type UC
reg 4, base: 3008MB, range: 64MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
total RAM covered: 4008M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2984MB, range: 8MB, type UC
reg 3, base: 2992MB, range: 16MB, type UC
reg 4, base: 3008MB, range: 64MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
e820: update [mem 0xba800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1effffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1effffff] page 2M
init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[mem 0x1f100000-0x1f1fffff] page 4k
[mem 0x1f200000-0x1fffffff] page 2M
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
init_memory_mapping: [mem 0x20100000-0xb8bb9fff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0xb89fffff] page 2M
[mem 0xb8a00000-0xb8bb9fff] page 4k
BRK [0x02fe7000, 0x02fe7fff] PGTABLE
init_memory_mapping: [mem 0xb9b40000-0xb9b40fff]
[mem 0xb9b40000-0xb9b40fff] page 4k
init_memory_mapping: [mem 0xb9b83000-0xb9cf3fff]
[mem 0xb9b83000-0xb9cf3fff] page 4k
init_memory_mapping: [mem 0xb9ffa000-0xb9ffffff]
[mem 0xb9ffa000-0xb9ffffff] page 4k
RAMDISK: [mem 0x3496a000-0x364acfff]
ACPI: RSDP 00000000b8bed000 000024 (v02 DELL )
ACPI: XSDT 00000000b8bed088 00008C (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 00000000b8bfa588 00010C (v05 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT 00000000b8bed1a0 00D3E3 (v02 DELL WN09 01072009 INTL 20120913)
ACPI: FACS 00000000b985bf80 000040
ACPI: APIC 00000000b8bfa698 000068 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: FPDT 00000000b8bfa700 000044 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FIDT 00000000b8bfa748 00009C (v01 DELL WN09 01072009 AMI 00010013)
ACPI: MCFG 00000000b8bfa7e8 00003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: LPIT 00000000b8bfa828 000104 (v01 DELL WN09 00000003 VLV2 0100000D)
ACPI: SLIC 00000000b8bfa930 000176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: HPET 00000000b8bfaaa8 000038 (v01 DELL WN09 01072009 AMI. 00000005)
ACPI: SSDT 00000000b8bfaae0 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 00000000b8bfb248 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 00000000b8bfb4d8 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 00000000b8bfb658 000042 (v01 DELL WN09 00000000 00000000)
ACPI: BGRT 00000000b8bfb6a0 000038 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff5000-0x13fff9fff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0003efff]
node 0: [mem 0x00040000-0x0009ffff]
node 0: [mem 0x00100000-0x1effffff]
node 0: [mem 0x1f100000-0x1fffffff]
node 0: [mem 0x20100000-0xb8bb9fff]
node 0: [mem 0xb9b40000-0xb9b40fff]
node 0: [mem 0xb9b83000-0xb9cf3fff]
node 0: [mem 0xb9ffa000-0xb9ffffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1018576
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11757 pages used for memmap
DMA32 zone: 752434 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0xb8bba000-0xb8be9fff]
PM: Registered nosave memory: [mem 0xb8bea000-0xb8bfbfff]
PM: Registered nosave memory: [mem 0xb8bfc000-0xb985ffff]
PM: Registered nosave memory: [mem 0xb9860000-0xb9ae4fff]
PM: Registered nosave memory: [mem 0xb9ae5000-0xb9b3ffff]
PM: Registered nosave memory: [mem 0xb9b41000-0xb9b82fff]
PM: Registered nosave memory: [mem 0xb9cf4000-0xb9ff9fff]
PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81536 r8192 d20864 u1048576
pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002633
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3791248K/4074304K available (7395K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 283056K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2166.756 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.51 BogoMIPS (lpj=8667024)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28590 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
CPU1: Thermal monitoring handled by SMI
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8667.02 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb8bfc000-0xb985ffff] (12992512 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:32:24, date: 09/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000b8be1918 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000b8be1498 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000b8be2e18 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000b8be3f18 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd071cfff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xd071c000-0xd071c7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0718000-0xd071801f]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd067ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xd0680000-0xd068ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0xb8bba000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9b41000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9cf4000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN0609 SYN0600 SYN0002 PNP0f13 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: unknown resource type 19 in _CRS
pnp 00:08: can't evaluate _CRS: 1
pnp 00:08: Plug and Play ACPI device, IDs DLL06ab PNP0c50 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd071cfff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27916K (ffff88003496a000 - ffff8800364ad000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xae27f000-0xb227f000] (64MB) mapped at [ffff8800ae27f000-ffff8800b227efff]
microcode: CPU0 sig=0x30678, pf=0x8, revision=0x831
microcode: CPU1 sig=0x30678, pf=0x8, revision=0x831
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1441715544.940:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7667
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (39 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e253281fe265ee3ceafcaa3f292e212b95f0359a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:368:531
tty ttyS11: hash matches
rtc_cmos 00:00: setting system clock to 2015-09-08 12:32:25 UTC (1441715545)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Freeing unused kernel memory: 784K (ffff88000273c000 - ffff880002800000)
Freeing unused kernel memory: 680K (ffff880002b56000 - ffff880002c00000)
systemd-udevd[101]: starting version 204
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 104 for MSI/MSI-X
wmi: Mapper loaded
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd071c000 port 0xd071c100 irq 104
ata2: DUMMY
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-4: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P1D, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 AM0P PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-4: New USB device found, idVendor=0bda, idProduct=5683
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: Integrated_Webcam_HD
usb 1-4: Manufacturer: CNFEH45I280030048990
usb 1-4: SerialNumber: 200901010001
usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.2: new full-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=046d, idProduct=c535
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: Dell Wireless Mouse WM123
usb 1-2.2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Dell Wireless Mouse WM123 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input8
hid-generic 0003:046D:C535.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Dell Wireless Mouse WM123] on usb-0000:00:14.0-2.2/input0
input: Logitech Dell Wireless Mouse WM123 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/input/input9
hid-generic 0003:046D:C535.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Dell Wireless Mouse WM123] on usb-0000:00:14.0-2.2/input1
usb 1-2.4: new high-speed USB device number 6 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=0bda, idProduct=0129
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.4: Product: USB2.0-CRW
usb 1-2.4: Manufacturer: Generic
usb 1-2.4: SerialNumber: 20100201396000000
tsc: Refined TSC clocksource calibration: 2166.666 MHz
psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4700]
psmouse serio1: synaptics: queried min coordinates: x [1322..], y [1240..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2a1, caps: 0xf40123/0x840300/0x12e800, board id: 3096, fw id: 1781191
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Switched to clocksource tsc
raid6: sse2x1 1319 MB/s
raid6: sse2x2 1624 MB/s
raid6: sse2x4 2302 MB/s
raid6: using algorithm sse2x4 (2302 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9134.000 MB/sec
generic_sse: 8199.000 MB/sec
xor: using function: prefetch64-sse (9134.000 MB/sec)
bio: create slab at 1
Btrfs loaded
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 8147964k swap on /dev/sda5. Priority:-1 extents:1 across:8147964k FS
systemd-udevd[304]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
cfg80211: Calling CRDA to update world regulatory domain
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 410000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 105 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
ath9k 0000:03:00.0: enabling device (0000 -> 0002)
ath: phy0: WB335 1-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90021680000, irq=18
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
type=1400 audit(1441715562.140:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=415 comm="apparmor_parser"
type=1400 audit(1441715562.140:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=415 comm="apparmor_parser"
type=1400 audit(1441715562.140:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
type=1400 audit(1441715562.140:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=415 comm="apparmor_parser"
type=1400 audit(1441715562.140:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
type=1400 audit(1441715562.140:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
snd_hda_codec: module verification failed: signature and/or required key missing - tainting kernel
input: Dell WMI hotkeys as /devices/virtual/input/input10
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
init: failsafe main process (690) killed by TERM signal
usb 1-2.1: USB disconnect, device number 4
usb 1-2.1: new full-speed USB device number 7 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
Linux video capture interface: v2.00
scsi2 : SCSI emulation for RTS5139 USB card reader
scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver rts5139
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5683)
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
type=1400 audit(1441715564.384:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=773 comm="apparmor_parser"
type=1400 audit(1441715564.384:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
type=1400 audit(1441715564.384:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1441715564.680:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=857 comm="apparmor_parser"
init: cups main process (786) killed by HUP signal
init: cups main process ended, respawning
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: Probing card using HDA DKMS, version 0.201410112046~ubuntu14.04.1
snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Headset Mic=0x19
sound hdaudioC0D0: Headphone Mic=0x1a
sound hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
Non-volatile memory driver v1.3
init: samba-ad-dc main process (1003) terminated with status 1
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1441715594.596:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2307 comm="apparmor_parser"
type=1400 audit(1441715594.596:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2307 comm="apparmor_parser"
type=1400 audit(1441715594.600:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2307 comm="apparmor_parser"
systemd-hostnamed[2549]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with 30:b5:c2:71:45:78
wlan0: send auth to 30:b5:c2:71:45:78 (try 1/3)
wlan0: authenticated
wlan0: associate with 30:b5:c2:71:45:78 (try 1/3)
wlan0: RX AssocResp from 30:b5:c2:71:45:78 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
usb 1-2.2: USB disconnect, device number 5
usb 1-2.3: new low-speed USB device number 8 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input15
hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
systemd-hostnamed[22122]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=0480, idProduct=a200
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: External USB 3.0
usb 2-1: Manufacturer: TOSHIBA
usb 2-1: SerialNumber: 20141103001683F
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi3 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
scsi 3:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
[drm:intel_dp_set_link_train] *ERROR* DP training pattern 3 not supported
usb 2-1: USB disconnect, device number 2
end_request: I/O error, dev sdc, sector 0
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 3:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Buffer I/O error on device sdc1, logical block 60850176
lost page write due to I/O error on sdc1
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
Aborting journal on device sdc1-8.
Buffer I/O error on device sdc1, logical block 60850176
lost page write due to I/O error on sdc1
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
usb 1-2.3: USB disconnect, device number 8
usb 1-2.3: new low-speed USB device number 9 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input16
hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=0480, idProduct=a200
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: External USB 3.0
usb 2-1: Manufacturer: TOSHIBA
usb 2-1: SerialNumber: 20141103001683F
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 2-1:1.0
scsi 4:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[24081]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!